Standalone system
Standalone access control systems commonly used to restrict unauthorized public entry into some restricted areas or places that are not integrated with the centralized security control systems. A local system is programmed for each entry point and access is normally gained by using access card, numeric code or password without access card. These products cannot integrated with any system to receive data.
Standalone access control systems are typically used in houses, small business premises, small secure sites and storage units. The installation and management of the standalone systems is relatively straightforward and access controls can be extended if requirements change
AR-721KP
AR-721KP
Ideal for low budget and simple pin based access control system.
12 numeric keypad with 1 bicolor LED (green and red) and buzzer.
Keypad will be locked for 30 sec for continuous error.
Built in tamper switch.
Built in watchdog to prevent system from halting
Optional bell output when pressing * and # together.
MZ11D7
MZ11D7
powerful standalone door access control system that combines the access controller and the card reader in one robust unit.
User is able to define his/her own user pin to access the door.
MZ11D7's modern and stylish design is suitable for use in residential and commercial buildings.
User Database: 1000 Card Database, 1000 User Define PIN, 1 Common PIN
Built-in Reader : EM with Wiegand 26-bits Format
Input : Exit Push Button, Door Sensor, Exit Reader.
Output : Door Latch, Alarm.
Operation Mode : Card, PIN, Card or PIN, Card + PIN.
Functions : Master PIN Programming, Add / Delete card via Reader or Keypad, Selectable Lock Release Time from 01-99 seconds.
MP7G3
MP7G3
MP7G3BL PIN Access Control System is quick and easy to install.
Simple to manage and is a cost effective means of controlling access to a building.
The system integrated the control unit, and keypad into one robust unit which is then connected to a power supply, exit button and electric lock.
It is Single User PIN mode or Multiple User PIN mode programmable.
MP7G3BL PIN Access Control System can be installed to many doors over a site, all using the same User PIN
Perfect system for normal entry points such as residential areas, office premises and commercial centres.
Total Users : Single PIN or 100 User PINs
Number of Code : 4 - 8 digits Product
Input Port : Exit Button
Output Port : Door Latch
XP-SR200K
XP-SR200K
Standalone Proximity with Keypad Access System.
Supports up to 200 card users, 10 sets PIN access, suitable for small to medium size requirement.
Pin Only Access : Use 4 digits secret code to access, Multiple sets of code, and Codes can be re-programmed easily.
Proximity Card Technology: Easy to use, Reliable technology, High durability, and Just touch the card to access.
Standalone Architecture : No PC is required to operate and LED and audio buzzer indication.
